Paver Mould Cleaner PPMC 1000 and Plastic Tiles Moulds Cleaning Chemical, Cement Remover Chemicals India, remove Concrete from paver moulds india.

Paver Mould Cleaner PPMC 1000

Description

Paver Mould Cleaner PPMC 1000 and Plastic Tiles Moulds Cleaning Chemical, Cement Remover Chemicals India, remove Concrete from paver moulds india.

Paver Mould Cleaner PPMC 1000 Product Description:

It is highly concentrated and very powerful penetrating Chemical agents materials which is effectively react with cement ( Concrete ) to loosen the Concrete bonding strength . We offer our prestigious clients the premium range of Paver Mould Cleaner PPMC 1000. for Best results can obtain on dry surface of cement. Paver Mould Cleaner PPMC 1000 R & D has developed this molecular cement dissolved as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula. It uses an active ingredient found in sugar cane syrup, and is completely biodegradable.

Paver Mould Cleaner PPMC 1000 turned this vulnerability into an opportunity. “Back-Set” safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.

Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.

ACTIVE MATTER : 98-100 %

Paver Mould Cleaner PPMC 1000 is better ?

Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.

It’s chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.

The offered cement remover is broadly demanded for its effective usage & perfect composition. Moreover, our cement remover can be availed by us within the given time at reasonable rates to our customers.

Features:

  • Long shelf life
  • Accurately processed
  • Purity

Other Details:

  • The hardened concrete is saturated with back, set, either with a brush or by spraying
  • After 15: 20 minutes, the area is again saturated with the chemical
  • The concrete typically begins to soften in 20, 30 minutes,and can be rinsed off with water
  • The amount required for dosage can be obtained
  • BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended
  • These are recommended values based on experience
  • For optimum results dose Paver Mould Cleaner PPMC 1000 directly to the surface
  • The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of
  • Cement to be removed . 5 to 20 % recommended
  • These are recommended values based on experience
  • For optimum results dose Paver Mould Cleaner PPMC 1000 directly to the surface
  • Undiluted: In cases where we deal with heavy deposit build, up, cement remover must be applied undiluted
  • Diluted: In cases of light deposition, on large surface areas, a solution between 10: 40 % may be used
  • B. Cleaning Procedure
  • Undiluted/Diluted: In parts such as corner cavities, tank skeleton inlets, etc
  • Apply Paver Mould Cleaner PPMC 1000 through hard brush, mop, sponge or any other manual method
  • Let it soak for 15 minutes. Afterwards, wash thoroughly by applying high, pressure water source
  • In case of deposit persistence, repeat the cleaning procedure
  • Refer to technical data sheet